Test kits and accessories designed to help your organisation meet regulatory fit testing requirements for tight fitting respirators. The kits can be used to validate face to respirator seal on any disposable respirator or half mask respirator. Not suitable for fit testing full facepiece respirators – this must be through Quantitative face fit testing.

• Qualitative fit test kit including hood, collar, 2 nebulisers, bitter tasting sensitivity solution, bitter tasting fit test solution and laminated user instructions.
• FT-30 uses a test solution of denatonium benzoate to produce a very bitter tasting spray
• Spare hoods, nebulisers and solutions are also available
• Spare hoods, nebulisers and solutions are available for the fit test kits.
• For Occupational Use Only
• 3M™ recommends users are face-fit tested before using a respirator and repeated regularly as part of their occupational respiratory protection program.
• Follow all applicable national and other guidance with respect to face fit testing. In the UK please see further guidance from the Health and Safety Executive (HSE) and their guidance document INDG 479 or contact 3M™