3M™ Screen Printable Pressure Sensitive Adhesive SP7202 is a liquid that can be applied through a screen printing process, then cured with 1-2 seconds under UV light to become a pressure sensitive adhesive. It allows fine bond lines greater than 0.2mm and holes as small as approximately 1mm with less waste than die cutting. The 100% solids adhesive can be printed directly on parts. When cured it is water and chemical resistant, and can be bonded immediately or covered with a liner for shipping to a different location.

• Screen-printable liquid cures under UV light to become a pressure sensitive adhesive (PSA)
• Works with conventional screen printing and UV curing equipment
• Allows printing of narrow bond lines (> 0.2mm) and holes as small as approximately 1mm
• UV curable in 1-2 seconds
• 100% solids adhesive can print directly on parts and be covered with a liner for movement or shipping
• Water and chemical resistant when cured
• Excellent adhesion to polycarbonate, polyester and higher surface energy materials